1、 Precautions before use of climbing car [Ningbo aerial work car rental, Ningbo climbing car rental, Ningbo lift car rental] 1. Before using the climbing car, please carefully check whether the following parts of the climbing car are normal: □ check whether the hinge lug connection and the shaft pin are normal, whether the hinge lug connection is cracked or expanded, and whether the worn limit circlip of the shaft pin is missing or broken. 2. Check whether the hydraulic box and cylinder are normal and whether there is oil leakage, and whether the hydraulic oil pipe is normal and whether there is damage or aging cracking. 3. Check whether the 4 tires are normal, damaged or short of air. 4. Check whether the 4 telescopic support legs are normal and whether there are cracks at the connection with the base, and whether the support seat at the bottom of the support leg is missing. 5. Check whether the platform fence is safe and reliable, whether the fence fence is rusted, which affects the safe use, and whether there are cracks at the joints; 6、 Check whether the working load is within 500kg. 7. Check whether the wind force in the working environment conforms to the safety specification of working height. 2、 Use steps of climbing car [Ningbo aerial vehicle rental, Ningbo climbing car rental, Ningbo lift car rental]: 1. Before the climbing car arrives at the operation area, it is necessary to open the four telescopic support legs, raise the four support legs to about 5cm above the ground completely with the special wrench attached to the car, adjust and calibrate the four support legs according to the display of the level meter provided by the car, and insert the safety bolt after the calibration; Precautions: 1. There shall be no collapse or settlement at the contact between the support leg base and the ground after bearing. If working on soft ground, sleepers or boards with a thickness of not less than 1.5cm and an area of not less than 0.5m2 must be padded at the bottom of each base to ensure that the climbing car is stable without settlement, shaking or tilting; 2. It is strictly prohibited to carry out the climbing operation without opening the support leg and bearing the tire!!! 3. It is forbidden to use the climbing car without horizontal calibration or inaccurate horizontal calibration!!! 2. After the support leg is correctly opened and horizontally calibrated, the electrician shall connect and power on, close the power supply air switch in the distribution control box, insert the key of the switch and turn the knob to the "on" position, and carry out the lifting control according to the indication button of the panel; Precautions: 1. Check whether the ground wire is effectively connected after the electrician is connected; 2. Check whether the indicator lights are normal after power on. 3. Before lifting and lowering, the vehicle shall be subject to no-load lifting test once to observe whether the lifting and lowering of all parts are normal; Precautions: 1. Check whether the control buttons and switches are normal; 2. Check whether the lifting process is smooth and whether there is abnormal phenomenon, and check whether the indication of hydraulic oil pressure gauge is normal and whether there is overpressure. 4. After the operator gets on the platform of the climbing car, close the platform fence door and grasp the handrail of the platform fence; Precautions: 1. Operators must strictly implement the company's safety standards and specifications for work at heights after boarding the climbing car; 2. Before climbing the platform with temporary power cables or other objects and tools, they must be bound and fixed on the platform to avoid safety accidents caused by slipping and falling when they are at heights; 3. The maximum load of the climbing car is 500kg , no overloading!!! 5. The operator of the climbing car shall wait for the instruction of the operator on the platform to operate the climbing car for lifting and lowering. During the lifting and lowering process, the platform lifting speed shall be uniform and reach the specified height slowly; Precautions: 1. The operator must pay attention to the operation of the climbing car, and carefully wait for the instructions of the operator on the platform to carry out the lifting operation. It is strictly prohibited to start and stop the lifting operation without permission!!! 2. The maximum lifting height of the climbing car is 11m, super high is strictly prohibited!!! 6. After the climbing operation, lower the lifting platform to the lowest point, close the switch lock and pull out the key, close the power supply air switch in the power distribution control box, and after the operator and other personnel evacuate the lifting platform safely, the electrician shall remove the temporary power line of the climbing vehicle and collect the power line; 7. Put up the support leg base and support leg, return the mobile climbing car to the storage place of the climbing car in the maintenance workshop, return the key to the storage department of the climbing car, and sign on the application form for use of the climbing car to confirm the handover.
